8980194581 ISUZU Radiator Grille Holder For NHR NJR NKR NKS

 

 

Step	Procedure
1	Open the hood to access the top of the grille
2	Inspect the grille mounting area – Identify broken or missing holders
3	For broken holders: Remove any remaining pieces from the grille and radiator support
4	Clean the mounting holes of debris and old plastic fragments
5	Insert the new grille holder into the grille (if designed to mount to grille first)
6	OR insert the new holder into the radiator support mounting hole (if designed for permanent mounting)
7	Align the grille with the mounting holes
8	Press the grille firmly into place until all holders snap securely
9	Gently tug the grille to verify all holders are engaged
10	Close the hood and test drive – Listen for rattles

Critical Tips:

Tip	Benefit
Do not use grease on outer rubber surface	Grease can cause rubber to slip – use only soapy water or silicone spray
Press only on outer steel shell	Pressing on rubber or inner sleeve destroys the bushing
Replace both sides	Ensures balanced rear suspension performance
Check shackles and bolts for wear	Replace worn components while bushings are being replaced
Torque at ride height	Prevents bushing pre-load and premature failure

Application	Quantity Needed
Single grille holder	1 piece
Complete grille replacement	6-10 pieces (depending on model year)
Full set for front grille	Contact us for complete kit quantity

Reason	Benefit
2 quality options on one page	Compare and choose based on your budget and durability needs
China ISUZU (Qingling) Quality available	Factory-grade UV-stabilized plastic – Best value
Aftermarket Quality available	Economical option for standard replacement
Exact OEM fitment	Precision-molded for ISUZU NHR, NJR, NKR, NKS
Prevents grille rattles	Restores proper retention – Quiet front end
UV-stabilized material	Resists sun damage – Longer service life
Easy snap-in installation	Simple DIY replacement – No special tools
Low MOQ (1 piece)	Perfect for individual replacement or sample testing
Fast delivery	1–8 working days worldwide
1-year warranty	Peace of mind on every order
Bulk discounts available	Contact us for fleet and wholesale pricing

Q1: What is a radiator grille holder?

A: A radiator grille holder (also called grille clip, retainer, or fastener) is a small plastic component that secures the front grille to the radiator support panel on ISUZU light-duty trucks. These holders prevent the grille from vibrating, rattling, or falling off.

Q2: How many grille holders do I need for my truck?

A: Most ISUZU NHR, NKR, and NKS trucks require 6 to 10 grille holders for the complete front grille. The exact number depends on your specific model year and grille design. Count the mounting points on your grille or existing holders before ordering.

Q3: Will this fit my ISUZU NKR?

A: Yes. This grille holder is specifically designed for ISUZU NHR, NJR, NKR, and NKS light-duty trucks. If your NKR uses factory grille mounting clips, this is the correct replacement part.

Q4: Can I use zip ties or screws instead of grille holders?

A: Zip ties and screws are temporary fixes only. Proper grille holders are designed to retain the grille while allowing for thermal expansion and vibration. Permanent repair requires the correct plastic clips.

Q5: What is the difference between OEM numbers 8980194581 and 1301224-PA11?

A: These are different numbering formats for the same grille holder:

8980194581 / 8-98019458-1 – ISUZU global parts catalog format

1301224-PA11 – ISUZU parts catalog format (alternative)

Both numbers refer to the identical radiator grille holder.

Q6: Why do plastic grille holders break?

A: Common causes of grille holder failure include:

UV degradation – Sun exposure makes plastic brittle

Heat cycling – Engine heat and weather extremes

Age – Plastic naturally becomes brittle over time

Improper removal – Breaking clips during grille removal

Q7: Do you offer wholesale pricing for bulk orders (fleet / shop quantities)?

A: Yes. Please contact us with your quantity and preferred quality level for a competitive quote. Bulk discounts available for repair shops, fleets, and parts distributors.

Q8: What is your warranty policy?

A: This product comes with a 1-year warranty against manufacturing defects. Please contact our support team for any issues.

 

 

 

 

 

 

Hot Tags: 8980194581 isuzu radiator grille holder for nhr njr nkr nks, China, suppliers, wholesale, price, bulk, discount, for sale, made in China